Hyundai Elantra: Automatic Transaxle System / Automatic Transaxle Control System

ATF Warmer Repair procedures
Removal 1. Remove the under cover. (Refer to Engine Mechanical System - "Engine room under cover") 2. Loosen the drain plug and drain the engine coolant. (Refer to Cooling System - "Coolan ...

Description and Operation
Description • Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. • These value ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Fuel Line Repair procedures
Removal 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") 3. Disconnect the fuel feed quick-connector (A). 4. Disconnect the vapor hose (A) wh ...

Hyundai Elantra AD (2016-2020) Service Manual: Power Mosfet Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until high speed. Specification Fan Speed (Manual)Motor Voltage (V)13.4 ± 0.5 (A/C OFF)3.8 ± 0.5 (A/C ON)25 ...

© 2018-2022 www.helantraad.com