Hyundai Elantra: Automatic Transaxle Control System / Line Pressure Control Solenoid Valve Specifications

Hyundai Elantra AD (2016-2020) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Valve Specifications

Specifications

? Control type : Normally high type

Shape	Items	Specifications
	Control current(voltage) [mA]	0 ~ 850
	Supply pressure [kpa (kgf/cm?, psi)]	539.36 (5.5, 78.23)
	Control pressure [kpa (kgf/cm?, psi)]	0 ~ 519.75 (0 ~ 5.3, 0 ~ 75.38)
	Internal resistance(?)	4.8 ~ 5.4

Line Pressure Control Solenoid Valve Description and Operation

Description • Line pressure control solenoid valve is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the line press ...

Line Pressure Control Solenoid Valve Components and Components Location

Components Location 1. 26 Brake Control Solenoid Valve (26/B)2. 35R Clutch Control Solenoid Valve (35R/C)3. Underdrive Brake Control Solenoid Valve (UD/B)4. Overdrive Clutch Control Solenoid Valv ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Height Adjust Components and Components Location
Component Location 1. Height adjust ...

Hyundai Elantra AD (2016-2020) Service Manual: Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the knock sensor connector (A). 3. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold") 4. Remove the installation bolt (A), and then remove the sens ...