Hyundai Elantra: Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description and Operation
| Description |
| • |
Overdrive clutch control solenoid valve(OD/C_VFS) is attached to the valve body. |
| • |
This variable force solenoid valve directly controls the hydraulic pressure inside the overdrive clutch.
|
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
M ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Specifications
ShapeItems Specifications Control current(voltage) [mA] 0 ~ 1100 Supply pressure [kpa (kgf/cm?, psi)] 1569.06 (16, 227.57) Control pressure [kpa (kgf/cm?, psi)] 0 ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Description and Operation
Description
BSD is a system that uses two magnetic wave radar sensors
attached on the rear panel to measure the distance from the following
vehicles and provides the sensing and (visual and auditory) alarm of any
vehicle coming into the blind spot.
-
Blind Spot Detection (BSD) : Senses o ...
Hyundai Elantra AD (2016-2020) Owners Manual: Floor Mat Anchor(s)
ALWAYS use the Floor Mat Anchors to attach the front floor mats to the vehicle.
The anchors on the front floor carpet keep the floor mats from sliding forward.
WARNING
The following must be observed when installing ANY floor mat to the vehicle.
Ensure to remove a protective film attached o ...
