Hyundai Elantra: Automatic Transaxle Control System / 35R Clutch Control Solenoid Valve(35R/C_VFS) Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 35R Clutch Control Solenoid Valve(35R/C_VFS) Description and Operation

Description

•	35R Clutch control solenoid valve(35R/C) is attached to the valve body.

•	This variable force solenoid valve directly controls the hydraulic pressure inside the 35R clutch.

Line Pressure Control Solenoid Valve Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. M ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications

Specifications ShapeItems Specifications Control current(voltage) [mA] 0 ~ 1100 Supply pressure [kpa (kgf/cm?, psi)] 1569.06 (16, 227.57) Control pressure [kpa (kgf/cm?, psi)] 0 ...

Other information:

Hyundai Elantra AD (2016-2020) Owners Manual: Limitations of the system
The driver must be cautious in the below situations because the system may not detect other vehicles or objects in certain circumstances: The vehicle is driven in inclement weather such as heavy rain or snow. The sensor is polluted with rain, snow, mud, etc. The rear bumper where the senso ...

Hyundai Elantra AD (2016-2020) Service Manual: Blower Unit Repair procedures
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a ...