Hyundai Elantra: Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Hyundai Elantra AD (2016-2020) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Specifications

? Control type : Normally low type

Shape	Items	Specifications
	Control current(voltage) [mA]	0 ~ 850
	Supply pressure [kpa (kgf/cm?, psi)]	539.36 (5.5, 78.23)
	Control pressure [kpa (kgf/cm?, psi)]	0~519.75 (0~5.3, 0~75.38)
	Internal resistance(?)	4.8 ~5.4

Torque Converter Control Solenoid Valve (T/CON_VFS) Description and Operation

Description • Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Components and Components Location

Components Location 1. 26 Brake Control Solenoid Valve (26/B)2. 35R Clutch Control Solenoid Valve (35R/C)3. Underdrive Brake Control Solenoid Valve (UD/B)4. Overdrive Clutch Control Solenoid Valv ...

Other information:

Hyundai Elantra AD (2016-2020) Owners Manual: Check Tire Pressure
■ Supervision cluster You can check the tire pressure in the Assist Mode on the cluster. Refer to the "LCD Display Mode" section in chapter 3. A "Drive to display" message will appear for the first few minutes of driving after initial engine start up. If the tire ...

Hyundai Elantra AD (2016-2020) Service Manual: Oil Pressure Switch Repair procedures
Removal and Installation 1. Disconnect the oil pressure switch connector (A) and then remove the oil pressure switch (B). Tightening torque : 9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft) 2. Install in the reverse order of removal. • When installing the o ...