Hyundai Elantra: Automatic Transaxle Control System / Output Speed Sensor Specifications

Specifications
? Type: Hall effect sensor
? Specifications
Items
Specifications
Operation condition [°C(°F)]
(-40 ~ 150) -40 ~ 302
Output voltage(V)
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Output Speed Sensor Description and Operation
Description The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor prov ...

Output Speed Sensor Schematic Diagrams
Circuit Diagram ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Parking Brake Cable Repair procedures
Removal [Rear disc brake type] 1. Disconnect the negative (-) battery cable. 2. Release the parking brake. 3. Remove the floor console assembly. (Refer to Body - "Floor console") 4. Disconnect the connector (A) of parking brake switch. 5. Remove the parking brake cable after ...

Hyundai Elantra AD (2016-2020) Service Manual: Radiator Repair procedures
Inspection Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. Apply a pressure of 93.16 ~ 122.58 kPa (0.95 ~ 1.25 kgf/cm?, 13.51 ~ 17.78 psi). 3. Check for a drop in pressure. 4. If the pressure drops, re ...

© 2018-2022 www.helantraad.com