Hyundai Elantra: Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
| Description |
| • |
26 brake control solenoid valve(26/B_VFS) is attached to the valve body. |
| • |
This variable force solenoid valve directly controls the hydraulic pressure inside the 26Brake. |
Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
M ...
26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Specifications
ShapeItems Specifications Control current(voltage) [mA] 0 ~ 1100 Supply pressure [kpa (kgf/cm?, psi)] 1569.06 (16, 227.57) Control pressure [kpa (kgf/cm?, psi)] 0 ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Filler-Neck Assembly Repair procedures
Removal
1.
Remove the rear-LH wheel, tire, and the inner wheel house.
2.
Disconnect the fuel filter hose (A) and the ventilation hose (B).
3.
Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).
4.
Remove the filler-neck assembly from the vehicle after ...
Hyundai Elantra AD (2016-2020) Service Manual: Knock Sensor (KS) Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the knock sensor connector (A).
3.
Remove the intake manifold.
(Refer to Engine Mechanical System - "Intake Manifold")
4.
Remove the installation bolt (A), and then remove the sens ...
