Hyundai Elantra: Automatic Transaxle Control System / SS-A Solenoid Valve(ON/OFF) Specifications

Specifications
? Control type : Normally low type
Shape
Items
Specifications

Control current(voltage) [V]
9 ~ 16
Supply pressure [kpa (kgf/cm?, psi)]
490.33 (5.0, 71.12)
Control pressure [kpa (kgf/cm?, psi)]
0 ~ 490.33 (0 ~ 5.0, 0 ~ 71.12)
 Internal resistance(?)
10 ~ 11

SS-A Solenoid Valve(ON/OFF) Description and Operation
Description • SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. • SS-A Solenoid valve(ON/OFF) is installed at valve body. ...

SS-A Solenoid Valve(ON/OFF) Components and Components Location
Components Location 1. 26 Brake Control Solenoid Valve (26/B)2. 35R Clutch Control Solenoid Valve (35R/C)3. Underdrive Brake Control Solenoid Valve (UD/B)4. Overdrive Clutch Control Solenoid Valv ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: 26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check that the ...

Hyundai Elantra AD (2016-2020) Service Manual: Repair procedures
Adjustment 1. Place the car on a flat surface and check whether the body and trunk lid are well-aligned. 2. After loosening the trunk lid hinge (A) mounting bolt, adjust the trunk lid by moving it up and down or from side to side. 3. Adjust the gap between the trunk lid and body by turni ...

© 2018-2025 www.helantraad.com