Hyundai Elantra: Maintenance
- Engine Compartment
- Maintenance Services
- Owner Maintenance
- Scheduled Maintenance Services
- Explanation of Scheduled Maintenance Items
- Engine Oil
- Engine Coolant
- Brake/Clutch Fluid
- Washer Fluid
- Parking Brake
- Air Cleaner
- Climate Control Air Filter
- Wiper Blades
- Battery
- Tires and Wheels
- Tire Care
- Recommended Cold Tire Inflation Pressures
- Check Tire Inflation Pressure
- Tire Rotation
- Wheel Alignment and Tire Balance
- Tire Replacement
- Wheel Replacement, Tire Traction, Tire Maintenance
- Tire Sidewall Labeling
- Tire Terminology and Definitions
- All Season Tires, Summer Tires, Snow Tires
- Radial-Ply Tires
- Low Aspect Ratio Tires
- Fuses
- Instrument Panel Fuse Replacement
- Engine Compartment Panel Fuse Replacement
- Fuse/Relay Panel Description
- Light Bulbs
- Headlamp, Parking Lamp, Turn Signal Lamp and Side Marker
- Side Repeater Lamp Replacement
- Rear Combination Light Bulb Replacement
- High Mounted Stop Light Replacement
- License Plate Light Bulb Replacement
- Interior Light Bulb Replacement
- Appearance Care
- Emission Control System
Emergency Towing
If towing is necessary, we recommend you have it done by an authorized HYUNDAI
dealer or a commercial tow truck service.
If towing service is not available in an emergency, your vehicle may be te ...
Engine Compartment
■ 1.6 T-GDI
■ 2.0 MPI
1. Engine oil filler cap
2. Engine oil dipstick
3. Brake/Clutch fluid reservoir
4. Positive battery terminal
5. Negative battery terminal
6. Fuse box
7. Air clean ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Fuel Pressure Regulator Repair procedures
Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
2.
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).
3.
Remove the head assembly (A) after releasing the cushion fixing hooks.
4.
Disconnect the fuel tube quick-connec ...
Hyundai Elantra AD (2016-2020) Service Manual: Smart Key Unit Repair procedures
Removal
Smart Key Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box.
(Refer to Body - "Glove Box Upper Cover Assembly")
3.
Remove the smart key unit (A) after disconnecting the connectors (B) and loosening the bolt and nut.
Interior 1 Antenna
...
