Hyundai Elantra: Appearance Care / Exterior Care
Exterior general caution
It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label.
High-pressure washing
- When using high-pressure washers, make sure to maintain sufficient distance from the vehicle. Insufficient clearance or excessive pressure can lead to component damage or water penetration.
- Do not spray the camera, sensors or its surrounding area directly with a high pressure washer. Shock applied from high pressure water may cause the device to not operate normally.
- Do not bring the nozzle tip close to boots (rubber or plastic covers)or connectors as they may be damaged if they come into contact with high pressure water.
- Do not use any high-pressure nozzles, which induce either one-direct water stream or water swirling.
- Protecting your vehicle’s finish
- Repairing your vehicle's finish
- Bright-metal maintenance, Underbody maintenance
- Aluminum wheel maintenance
- Corrosion protection
Appearance Care
...
Protecting your vehicle’s finish
Washing
To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly
and frequently at least once a month with lukewarm or cold water.
If you use your vehicle for off-ro ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Coolant Repair procedures
Refilling And Bleeding
•
Never remove the radiator cap when the engine is hot. Serious
scalding could be caused by hot fluid under high pressure escaping from
the radiator
•
When pouring engine coolant, be sure to shut the relay box
...
Hyundai Elantra AD (2016-2020) Service Manual: Evaporator Core Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
3.
Remove the heater unit lower case (A) after loosening the mounting screws.
4.
Pull out the evaporator core (A) from the heater unit.
5.
T ...
