Hyundai Elantra: Maintenance / Wiper Blades

Blade Inspection

Hyundai Elantra. Wiper Blades

Contamination of either the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wiper functionality. Common sources of contamination are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping properly, clean both the window and the blades with a clean cloth dampened with washer fluid.

NOTICE

To prevent damage to the wiper blades, arms or other components, do not:

Information

Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean.

Climate Control Air Filter
Filter Inspection The climate control air filter should be replaced according to the Maintenance Schedule. If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a ...

Blade Replacement
When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. NOTICE To prevent damage to the wiper arms or other components, do not attempt to move the ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Schematic Diagrams
Schematic Diagrams Terminal Function TypePin NoDescriptionBattery1Battery +2Battery -VSS1IGN2-3-4-5-6-7HIGH CAN8LOW CAN ...

Hyundai Elantra AD (2016-2020) Service Manual: Output Speed Sensor Repair procedures
Inspection 1. Using the GDS, check the input/output speed sensor waveforms. A. Turn OFF the ignition switch. B. Connect the GDS to the Data Link Connector(DLC) on the lower crash pad. C. Ignition "ON" & Engine "ON". D. Check the input/output speed sensor waveforms at high spe ...

© 2018-2024 www.helantraad.com