Hyundai Elantra: Maintenance / Owner Maintenance. Owner Maintenance Schedule

Hyundai Elantra AD (2016-2020) Owners Manual / Maintenance / Owner Maintenance. Owner Maintenance Schedule

WARNING

Performing maintenance work on a vehicle can be dangerous. If you lack sufficient knowledge and experience or the proper tools and equipment to do the work, have it done by an authorized HYUNDAI dealer.

ALWAYS follow these precautions for performing maintenance work:

The following lists are vehicle checks and inspections that should be performed by the owner or an authorized HYUNDAI dealer at the frequencies indicated to help ensure safe, dependable operation of your vehicle.

Any adverse conditions should be brought to the attention of your dealer as soon as possible.

These Owner Maintenance vehicle checks are generally not covered by warranties and you may be charged for labor, parts and lubricants used.

Owner Maintenance Schedule

When you stop for fuel:

WARNING

Be careful when checking your engine coolant level when the engine is hot. This may result in coolant being blown out of the opening and cause serious burns and other injuries.

While operating your vehicle:

At least monthly:

At least twice a year: (i.e., every Spring and Fall)

At least once a year:

Maintenance Services
You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures. We recommend you have your vehicle maintai ...

Other information:

Hyundai Elantra AD (2016-2020) Owners Manual: LCD Display Messages
Shift to P or N to start engine (for smart key system and Intelligent Variable Transmission (IVT)/dual clutch transmission) This warning message is displayed if you try to start the engine with the shift lever not in the P (Park) or N (Neutral) position. Information You can start the engine w ...

Hyundai Elantra AD (2016-2020) Service Manual: Oil Pressure Switch Repair procedures
Removal and Installation 1. Disconnect the oil pressure switch connector (A) and then remove the oil pressure switch (B). Tightening torque : 9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft) 2. Install in the reverse order of removal.     • When installing the o ...

© 2018-2026 www.helantraad.com