Hyundai Elantra: Engine Coolant / Changing Engine Coolant

Have coolant changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter.

WARNING

Do not use engine coolant or antifreeze in the washer fluid reservoir.

Engine coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident.

Engine coolant may also cause damage to paint and body trim.

NOTICE

To prevent damage to engine parts, put a thick towel around the radiator cap before refilling the coolant to prevent the coolant from overflowing into engine parts, such as the generator.

Checking the Engine Coolant Level
■ 1.6 T-GDI ■ 2.0 MPI Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. The coolant level should be filled betwe ...

Brake/Clutch Fluid
Checking the Brake/Clutch Fluid Level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: General Tightening Torque Table
General Information BOLT (Nominal diameter)NUT (Nominal diameter) BOLT/NUT Thin screw Torque Nm (kg.m, Ib-ft) Nominal diameter. (mm)Pitch [mm (in.) ]4T8T10TM50.8 (0.031) 2.0 ~ 3.0 (0.2 ~ 0.3, 1.4 ~ 2.2) 4.9 ~ 6.9 (0.5 ~ 0.7, 3.6 ~ 5.1) 7.8 ~ 10.8 (0.8 ~ 1.1, 5.8 ~ 8.0) M61 ( ...

Hyundai Elantra AD (2016-2020) Service Manual: Seat Belt Buckle Switch (BS) Description and Operation
Description • The SRSCM should detect the condition of seat belt buckles (BS) of the driver and passenger seats. • The SRSCM provides two pins to each side, in order to enter the condition of seat belt buckles (BS) of the driver and passenger seats. • The seat belt buckle ...

© 2018-2025 www.helantraad.com