Hyundai Elantra: Light Bulbs / License Plate Light Bulb Replacement
1. Remove the cover by pressing it as direction of the arrows.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb.
4. Reinstall in the reverse order.
High Mounted Stop Light Replacement
1. Open the trunk.
2. Remove the socket by turning it counterclockwise until the tabs on the socket
align with the slots.
3. Remove the bulb from the socket by pressing it in and rotating it c ...
Interior Light Bulb Replacement
■ Map lamp
■ Room lamp
■ Luggage room lamp
■ Vanity mirror lamp (if equipped)
1. Using a flat-blade screwdriver, gently pry the lens from the interior lamp
housing.
2. Remove th ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Oil Pump Repair procedures
Removal and Installation
1.
Remove the timing chain cover.
(Refer to Timing System – “Timing Chain Cover”)
2.
Remove the oil pump cover (A).
Tightening torque
Screws :
5.9 ~ 8.8 N.m (0.6 ~ 0.9 kgf.m, 4.3 ~ 6.5 lb-ft)
Bolts :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
...
Hyundai Elantra AD (2016-2020) Service Manual: Blower Motor Repair procedures
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.
3.
Replace the blower motor if it is proved that there is a problem with it.
Replacem ...
