Hyundai Elantra: Maintenance / Washer Fluid

Checking the Washer Fluid Level

Hyundai Elantra. Washer Fluid

Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.

WARNING

To prevent serious injury or death, take the following safety precautions when using washer fluid:

Brake/Clutch Fluid
Checking the Brake/Clutch Fluid Level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

Parking Brake
Checking the Parking Brake Check the stroke of the parking brake by counting the number of "clicks" heard while fully applying it from the released position. Also, the parking brake alo ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Temperature Control Actuator Description and Operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by ...

Hyundai Elantra AD (2016-2020) Service Manual: Floor Console
Components and Components Location Components [M/T] 1. Floor console assembly 2. Console tray mat3. Parking brake cover4. Console garnish assembly 5. Console upper complete assembly 6. Front console side cover [LH]7. Front console side cover [RH] [A/T] 1. Floor console assembly 2. C ...

В© 2018-2026 www.helantraad.com