Hyundai Elantra: Fuel Delivery System / Fuel Pressure Regulator Repair procedures

Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
2.
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).

3.
Remove the head assembly (A) after releasing the cushion fixing hooks.
4.
Disconnect the fuel tube quick-connectors (B).

5.
Remove the fuel sender (A) in the direction of an arrow.

6.
Remove the reservior-cup (B) after releasing the fixing hooks (A).

7.
Release the fixing hooks, and then remove the fuel pressure regulator (A).

Installation
1.
Installation is reverse of removal.
Fuel Sensor Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel sender connector (A). 3. Remove the fuel sender (A) in the direction of an arrow. I ...

Fuel Line Repair procedures
Removal 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Front Disc Brake Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub . Tightening torque: 107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)     • Be careful not to da ...

Hyundai Elantra AD (2016-2020) Service Manual: Repair procedures
Adjustment Glass Adjustment     • Check the glass run channel for damage or deterioration, and replace them if necessary. 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Separate the mounting plug hole (A) from the rear door module. ...

© 2018-2026 www.helantraad.com