Hyundai Elantra: Maintenance / Engine Coolant
The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory.
Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season and before traveling to a colder climate.
Checking the Engine Oil and Filter
Have engine oil and filter changed by an authorized HYUNDAI dealer according
to the Maintenance Schedule at the beginning of this chapter.
WARNING
CALIFORNIA PROPOSITION 65 WARNING
Engine oil c ...
Checking the Engine Coolant Level
■ 1.6 T-GDI
■ 2.0 MPI
Check the condition and connections of all cooling system hoses and heater hoses.
Replace any swollen or deteriorated hoses.
The coolant level should be filled betwe ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Water Temperature Control Assembly Repair procedures
Removal and Installation
1.
Remove the engine cover.
(Refer to Engine And Transaxle Assembly - “Engine Cover”)
2.
Drain the engine coolant so its level is below water temperature control assembly.
(Refer to Cooling System - "Coolant")
3.
Remove the air duct and air cleaner assembly ...
Hyundai Elantra AD (2016-2020) Service Manual: Cluster Fascia Panel Repair procedures
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
Use a plastic panel removal tool to remove int ...
