Hyundai Elantra: Body (Interior and Exterior) / Rear Door
- Components and Components Location
- Repair procedures
- Rear Door Trim Components and Components Location
- Rear Door Trim Repair procedures
- Rear Door Inside Handle Repair procedures
- Rear Door Window Glass Components and Components Location
- Rear Door Window Glass Repair procedures
- Rear Door Module Components and Components Location
- Rear Door Module Repair procedures
- Rear Door Outside Handle Components and Components Location
- Rear Door Outside Handle Repair procedures
- Rear Door Latch Components and Components Location
- Rear Door Latch Repair procedures
- Rear Door Belt Outside Weatherstrip Repair procedures
- Rear Door Belt Inside Weatherstrip Repair procedures
- Rear Door Side Weatherstrip Repair procedures
Front Door Latch Repair procedures
Replacement
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2.
Remove the front door inside handle cage (A).
3.
Disconnect the front door latch connector (A). ...
Components and Components Location
Components
1. Rear door trim 2. Rear door belt inside weatherstrip 3. Rear door module 4. Rear door panel 5. Rear door delta inner cover 6. Holl plue7. Rear door belt outside w ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Brake Pedal Components and Components Location
Components
1. Stop lamp switch2. Brake pedal member assembly3. Return spring4. Bolt5. Brake pedal arm assembly
...
Hyundai Elantra AD (2016-2020) Service Manual: Receiver-Drier Repair procedures
Replacement
1.
Remove the condenser.
2.
Remove the cap (A) on the bottom of the condenser with a L wrench.
Tightening torque :
9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
3.
Remove the receiver-drier (A) from condenser using a long
nose plier. Check for crumbled recei ...
© 2018-2025 www.helantraad.com
