Hyundai Elantra: Rear Door / Rear Door Side Weatherstrip Repair procedures

Hyundai Elantra AD (2016-2020) Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Side Weatherstrip Repair procedures

Replacement

Loosen the rear door checker (B) mounting bolt.

Tightening torque :

16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m,12.3 ~ 15.9 lb-ft)

2.	Detach the clips, remove the rear door side weatherstrip (A).

To intall, reverse the removal procedure.

•	Replace any damaged clips.

Rear Door Belt Inside Weatherstrip Repair procedures

Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door belt inside weatherstrip (A). 3. To intall, reverse the removal procedure. ...

Body Side Molding

Delta Garnish Repair procedures Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remo ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: CVVT & Camshaft Repair procedures
Removal • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. • Mark all wiring and hoses to avoid misconnection. • Turn t ...

Hyundai Elantra AD (2016-2020) Service Manual: Rear Back Armrest Repair procedures
Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface. • Take care not to ...