Hyundai Elantra: Rear Door / Rear Door Inside Handle Repair procedures

Hyundai Elantra AD (2016-2020) Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Inside Handle Repair procedures

Replacement

1.	Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim")

2.	After loosening the mounting screws, remove the rear door inside handle (A).

To intall, reverse the removal procedure.

•	Make sure the door locks / unlocks and opens / closes properly.

•	Replace any damaged clips (or pin-type retainers).

Rear Door Trim Repair procedures

Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

Rear Door Window Glass Components and Components Location

Component Location 1. Rear door window glass ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Special Service Tools
Special Service Tools Tools(Number and name)IllustrationUse09200-3N000Engine support fixture (Beam)Removal and installation of the transaxle.Use this beam (SST No. : 09200-3N000) with the supporter (SST No. : 09200-2S000).?Permit operating with 09200-38001.?Refer to the engine support fixture a ...

Hyundai Elantra AD (2016-2020) Service Manual: Repair procedures
Service Point Target Auto Calibration (SPTAC) This procedure provides a way to calibrate the camera by having the service technician align the car to a well lit simulated straight road target; preferably wall mounted. The LKAS camera will have a "System Out of Calibration" DTC set if not ope ...