Hyundai Elantra: Driveshaft and axle
- General Information
- Front Axle Assembly
- Driveshaft Assembly
- Front Driveshaft Components and Components Location
- Front Driveshaft Repair procedures
- Dynamic Damper Components and Components Location
- Dynamic Damper Repair procedures
- TJ Joint Components and Components Location
- TJ Joint Repair procedures
- BJ Boot Components and Components Location
- BJ Boot Repair procedures
- Rear Axle Assembly
Shift Cable Repair procedures
Removal
1.
Air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
2.
Battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Remove ...
General Information
Specifications
Specification
EngineTransaxleJoint type Max. permissible angle OuterInnerOuterInnerGAMMA 1.6 GDI6 MTBJ#23CTJ#2346.5°23°6 A/TBJ#23CTJ#22UII 1.6MT / DCT6 MTBJ#24CTJ#2446.5°23°7 ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Cylinder Head Repair procedures
Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait until the engine
coolant temperature drops below normal temperature (20°C [68°F]) before
removin ...
Hyundai Elantra AD (2016-2020) Service Manual: Power Window Switch Repair procedures
Inspection
[Driver Power Window Switch]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver door trim.
(Refer to Body - "Front Door Trim")
3.
Disconnect the power mirror switch connector from the door trim.
4.
Check for continuity between the terminals in each swi ...
