Hyundai Elantra: Emission Control System

Smart Cruise Control Switch Repair procedures
Inspection [Measuring Resistance] 1. Disconnect the cruise control switch connector from the control switch. 2. Measure resistance between terminals on the control switch when each function ...

General Information
...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Idler Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the idler (A). Tightening torque : 39.2 ~ 49.0N.m (4.0 ~ 5.0kgf.m, 28.9 ~ 36.2lb-ft) 3. Install in the reverse order of removal. Inspection Check the idler for excessive oil le ...

Hyundai Elantra AD (2016-2020) Service Manual: Crash Pad Lower Panel Repair procedures
Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Use a plastic panel removal tool to remove int ...

© 2018-2025 www.helantraad.com