Hyundai Elantra: Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Repair procedures

Hyundai Elantra AD (2016-2020) Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Repair procedures

Removal

1.	Disconnect the vapor hose (A).

2.	Remove the PCV valve (B).

Inspection

Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.

•	If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Installation

Installation is reverse of removal.

PCV Valve installation :

1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)

Positive Crankcase Ventilation (PCV) Valve Description and Operation

Operation Principle ...

Evaporative Emission Control System

...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: ETC (Electronic Throttle Control) System Description and Operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Accelerator Position Sensor (APS) is used to receive driver input. The ECM uses the APS s ...

Hyundai Elantra AD (2016-2020) Service Manual: Front Driveshaft Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft) • Be careful not to dam ...