Hyundai Elantra: General Information / Specifications

Specifications
Purge Control Solenoid Valve (PCSV)
? Specification
Item
Specification
Coil Resistance (?)
22.0 ~ 26.0 [20°C(68°F)]

Fuel Tank Pressure Sensor (FTPS)
? Type: Piezo-Resistive Pressure Sensor
? Specification
Pressure [kPa (kgf/cm?, in H2O)]
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
+6.67 (0.068, 26.8)
4.5

Canister Close Valve (CCV)
? Specification
Item
Specification
Coil Resistance (?)
19.5 ~ 22.5 [20°C(68°F)]

Tightening Torques
Item
kgf.m
N.m
lb-ft
Positive crankcase ventilation valve installation
0.2 ~ 0.3
1.96 ~ 2.94
1.45 ~ 2.17
Canister installation bolt/nut
2.0 ~ 3.0
19.6 ~ 29.4
14.5 ~ 21.7

Description and Operation
Description Emissions Control System consists of three major systems. - The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas ...

Troubleshooting
Troubleshooting SymptomSuspect areaEngine will not start or hard to startVapor hose damaged or disconnectedEngine hard to startMalfunction of the Purge Control Solenoid ValveRough idle or engine ...

Other information:

Hyundai Elantra AD (2016-2020) Owners Manual: Driving in Flooded Areas, Highway Driving
Driving in Flooded Areas Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake performance may be reduced. After driving through water, dry the brakes by ge ...

Hyundai Elantra AD (2016-2020) Service Manual: Hood Assembly Repair procedures
Replacement     • Be careful not to damage the hood and body.     • Removing or installing the hood requires an assistant. • When removing the clips, use a clip remover. 1. After loosening the hood hinge (A) mounting bolts, remove ...

© 2018-2025 www.helantraad.com