Hyundai Elantra: General Information / Description and Operation
| Description |
| - |
The Crankcase Emission Control System prevents blow-by gas
from releasing into the atmosphere. This system recycles gas back into
the intake manifold (Closed Crankcase Ventilation Type). |
| - |
The Evaporative Emission Control System prevents evaporative
gas from releasing into the atmosphere. This system burns gas at
appropriate engine operating condition after gathering it in the
canister. |
| - |
The Exhaust Emission Control System converts the three
pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of
nitrogen (NOx)] into harmless substances by using the 3-way catalytic
converter.
|
Specifications
Specifications
Purge Control Solenoid Valve (PCSV)
? Specification
ItemSpecificationCoil Resistance (?)22.0 ~ 26.0 [20°C(68°F)]
Fuel Tank Pressure Sensor (FTPS)
? Type: Piezo-Resistive ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Intake Manifold Repair procedures
Removal and Installation
1.
Remove the engine cover.
(Refer to Engine And Transaxle Assembly - “Engine Cover”)
2.
Disconnect the battery negative terminal.
3.
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhasut System - "Air Cleaner")
4.
Remove the engi ...
Hyundai Elantra AD (2016-2020) Service Manual: Description and Operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM
ignition input, the SRSCM activates the warning lamp for a LED lamp
check.
The lamp shall turn on for 6 seconds during the initialization phase and be turned off afterw ...