Hyundai Elantra: Body (Interior and Exterior) / Crash Pad
- Components and Components Location
- Cluster Fascia Panel Components and Components Location
- Cluster Fascia Panel Repair procedures
- Center Fascia Panel Components and Components Location
- Center Fascia Panel Repair procedures
- Crash Pad Lower Panel Components and Components Location
- Crash Pad Lower Panel Repair procedures
- Steering Column Shroud Panel Components and Components Location
- Steering Column Shroud Panel Repair procedures
- Crash Pad Side Cover Components and Components Location
- Crash Pad Side Cover Repair procedures
- Crash Pad Under Cover Repair procedures
- Glove Box Upper Cover Housing Components and Components Location
- Glove Box Upper Cover Housing Repair procedures
- Main Crash Pad Assembly Components and Components Location
- Main Crash Pad Assembly Repair procedures
- Cowl Cross Bar Assembly Components and Components Location
- Cowl Cross Bar Assembly Repair procedures
Components and Components Location
Components
1. Crash pad assembly2. Crash pad lower panel3. Crash pad side cover [LH]4. Crash pad side cover [RH]
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Receiver-Drier Repair procedures
Replacement
1.
Remove the condenser.
2.
Remove the cap (A) on the bottom of the condenser with a L wrench.
Tightening torque :
9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
3.
Remove the receiver-drier (A) from condenser using a long
nose plier. Check for crumbled recei ...
Hyundai Elantra AD (2016-2020) Service Manual: Rear Wheel Speed Sensor Repair procedures
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from front hub .
Tightening torque:
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)
•
Be careful not to dama ...
