Hyundai Elantra: Crash Pad / Cowl Cross Bar Assembly Components and Components Location
| Component Location |
| 1. Cowl cross bar assembly |
Main Crash Pad Assembly Repair procedures
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around ...
Cowl Cross Bar Assembly Repair procedures
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around ...
Other information:
Hyundai Elantra AD (2016-2020) Owners Manual: Jack label
The actual Jack label in the vehicle may differ from the illustration.
For more detailed specifications, refer to the label attached to the jack.
1. Model Name
2. Maximum allowable load
3. When using the jack, set your parking brake.
4. When using the jack, stop the engine.
5. Do not get und ...
Hyundai Elantra AD (2016-2020) Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 2 and 5 [B1/S1].
Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
4.
Check that the resistance is within the specification.
Specification : ...
