Hyundai Elantra: Crash Pad / Cluster Fascia Panel Components and Components Location
| Component Location |
| 1. Cluster fascia panel |
Components and Components Location
Components
1. Crash pad assembly2. Crash pad lower panel3. Crash pad side cover [LH]4. Crash pad side cover [RH]
...
Cluster Fascia Panel Repair procedures
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Variable Intake Solenoid(VIS) Actuator Repair procedures
Removal and Installation
1.
Disconnect the vacuum hose (A).
2.
Remove the variable Intake solenoid (VIS) actuator connector (B) and actuator (C).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
3.
Install in the reverse order of removal. ...
Hyundai Elantra AD (2016-2020) Service Manual: Filler-Neck Assembly Repair procedures
Removal
1.
Remove the rear-LH wheel, tire, and the inner wheel house.
2.
Disconnect the fuel filter hose (A) and the ventilation hose (B).
3.
Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).
4.
Remove the filler-neck assembly from the vehicle after ...
