Hyundai Elantra: Crash Pad / Steering Column Shroud Panel Repair procedures

Hyundai Elantra AD (2016-2020) Service Manual / Body (Interior and Exterior) / Crash Pad / Steering Column Shroud Panel Repair procedures

Replacement
[Steering column shroud lower panel]
   
Put on gloves to prevent hand injuries.
   
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
2.
Loosen the mounting screws by turning the steering wheel to the left and right, and remove the steering column shroud lower panel (A).

3.
To intall, reverse the removal procedure.
   
Replace any damaged clips (or pin-type retainers).
[Steering column shroud upper panel]
   
Put on gloves to prevent hand injuries.
   
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the crash pad side cover (A).
[LH]

[RH]

2.
Loosen the mounting screws and remove the crash pad molding (A).
[LH]

[RH]

3.
Using a screwdriver or remover, remove the cluster fascia panel (A).

4.
To intall, reverse the removal procedure.
   
Replace any damaged clips (or pin-type retainers).
Steering Column Shroud Panel Components and Components Location
Component Location 1. Steering column shroud lower panel2. Steering column shroud upper panel ...

Crash Pad Side Cover Components and Components Location
Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Fuel Pump Motor Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the electric pump wiring connector (A) and the fuel sender connector (B). 3. Remove the head assembly (A) after releasing the cushion fixing hooks. 4. Disconnect the fuel tube quick-connect ...

Hyundai Elantra AD (2016-2020) Service Manual: Purge Control Solenoid Valve (PCSV) Description and Operation
Description Purge Control Solenoid Valve (PCSV) is installed on the intake manifold and controls the evaporative purge between the canister and the intake manifold. It is a normally closed solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PC ...

© 2018-2023 www.helantraad.com