Hyundai Elantra: Engine Mechanical System / Intake And Exhaust System
- Air Cleaner Components and Components Location
- Air Cleaner Repair procedures
- Intake Manifold Components and Components Location
- Intake Manifold Repair procedures
- Variable Intake Solenoid(VIS) Actuator Repair procedures
- Exhaust Manifold Components and Components Location
- Exhaust Manifold Repair procedures
- Muffler Components and Components Location
- Muffler Repair procedures
Oil Level Gauge & Pipe Repair procedures
Removal and Installation
1.
Remove the oil level gauge (A).
2.
Install in the reverse order of removal. ...
Air Cleaner Components and Components Location
Components
1. Air cleaner cover2. Air cleaner element3. Air cleaner body4. Air duct5. Air intake hose6. Breather hose7. Resonator
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Temperature Control Actuator Description and Operation
Description
The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.
The signal from the control unit adjusts the position of the
temperature door by operating the temperature switch. Then the
temperature will be regulated by ...
Hyundai Elantra AD (2016-2020) Service Manual: Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the ECTS connector.
3.
Remove the ECTS.
4.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 1 and 3.
5.
Check that the resistance is within the specification.
...
