Hyundai Elantra: Intake And Exhaust System / Intake Manifold Components and Components Location
| Components |
| 1. Intake manifold assembly 2. Intake manifold gasket 3. Electronic throttle body | 4. Intake manifold stay 5. Variable intake solenoid (VIS) actuator 6. VCM motor |
Air Cleaner Repair procedures
Removal and Installation
Air Cleaner Assembly
1.
Remove the engine cover.
(Refer to Engine And Transaxle Assembly - “Engine Cover”)
2.
Disconnect the battery negative terminal.
3.
Re ...
Intake Manifold Repair procedures
Removal and Installation
1.
Remove the engine cover.
(Refer to Engine And Transaxle Assembly - “Engine Cover”)
2.
Disconnect the battery negative terminal.
3.
Remove the air duct an ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Front Impact Sensor (FIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
•
Do not turn the ignition switch ON and ...
Hyundai Elantra AD (2016-2020) Service Manual: Purge Control Solenoid Valve (PCSV) Description and Operation
Description
Purge Control Solenoid Valve (PCSV) is installed on the
intake manifold and controls the evaporative purge between the canister
and the intake manifold. It is a normally closed solenoid valve and is
open when the ECM grounds the valve control line. When the passage is
open (PC ...
