Hyundai Elantra: Intake And Exhaust System / Exhaust Manifold Components and Components Location
| Components |
| 1. Heat protector 2. Exhaust manifold gasket | 3. Exhaust manifold 4. Exhaust manifold stay |
Variable Intake Solenoid(VIS) Actuator Repair procedures
Removal and Installation
1.
Disconnect the vacuum hose (A).
2.
Remove the variable Intake solenoid (VIS) actuator connector (B) and actuator (C).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ ...
Exhaust Manifold Repair procedures
Removal and Installation
1.
Remove the engine cover.
(Refer to Engine And Transaxle Assembly - “Engine Cover”)
2.
Disconnect the battery negative terminal.
3.
Disconnect the oxygen se ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Radiator Repair procedures
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester.
2.
Apply a pressure of 93.16 ~ 122.58 kPa (0.95 ~ 1.25 kgf/cm?, 13.51 ~ 17.78 psi).
3.
Check for a drop in pressure.
4.
If the pressure drops, re ...
Hyundai Elantra AD (2016-2020) Service Manual: Antenna Coil Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column shroud panel.
(Refer to Body - "Steering Column Shroud Panel")
3.
Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A) after loosening the screw.
Installation
1 ...
