Hyundai Elantra: Brake System / ABS(Anti-Lock Brake System)

Parking Brake Cable Repair procedures
Removal [Rear disc brake type] 1. Disconnect the negative (-) battery cable. 2. Release the parking brake. 3. Remove the floor console assembly. (Refer to Body - "Floor console") 4. ...

Components and Components Location
Components 1. ABS Control Module(HECU)2. Front Wheel Speed Sensor3. Rear Wheel Speed Sensor4. ABS Warning lamp5. EBD / Parking brake warning lamp ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Accelerator Position Sensor (APS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification : Refer to "Specification" ...

Hyundai Elantra AD (2016-2020) Service Manual: Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier. Check for crumbled recei ...

В© 2018-2026 www.helantraad.com