Hyundai Elantra: Body Electrical System / Smart Key System
- Specifications
- Components and Components Location
- Description and Operation
- Smart Key Repair procedures
- Smart Key Unit Components and Components Location
- Smart Key Unit Schematic Diagrams
- Smart Key Unit Repair procedures
- Smart Key Diagnostic Repair procedures
Mic Repair procedures
Inspection
1.
Disconnector the negative (-) battery terminal.
2.
Remove the overhead console lamp.
(Refer to Body Electrical System - "Overhead Console Lamp")
3.
Remove the overhead conso ...
Specifications
Specifications
Smart Key Unit
ItemsSpecificationRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-22°F ~ 167°F (-30°C ~ 75°C)LoadMax. 4mA (When welcome light function off)
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Engine And Transaxle Assembly Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
•
Mark all wiring and hoses to avoid misconnection.
•
For rel ...
Hyundai Elantra AD (2016-2020) Service Manual: Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Verify that the mode control actuator operates to the vent mod ...
