Specifications |
Items | Specification |
Rated voltage | DC 12V |
Operating voltage | DC 9 ~ 16V |
Operating temperature | -22°F ~ 167°F (-30°C ~ 75°C) |
Load | Max. 4mA (When welcome light function off) |
Items | Specification |
Frequency | 433.92 Mhz |
Antenna type | FSK (Frequency Shift Keying) |
Items | Specification | ||||||
Battery | Lithium battery 3V 1EA | ||||||
Distance | 30m from vehicle, RF : 30m, Passive(LF) : 0.7m | ||||||
Battery life | More than 2 years (10 times / a day)
| ||||||
Push buttons | 4 (Door lock / unlock, Liftgate, Panic) | ||||||
Frequency(Rx) | 125 kHz | ||||||
Frequency(Tx) | 433.92 MHz | ||||||
Numbers | 2EA |
Items | Specification |
Rated voltage | DC 12V |
Operating voltage | DC 9 ~ 16V |
Operating temperature | -22°F ~ 167°F (-30°C ~ 75°C) |
Frequency | 125kHz |
Numbers | Interior(2EA), Door(2EA), Bumper(1EA), Trunk(1EA) |
Hyundai Elantra AD (2016-2020) Service Manual: TJ Joint Repair procedures
Disassembly
•
Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease.
•
The boot band should be replaced with a new one.
1.
Remove the Front Driveshaft.
(Refer to Driveshaft Assembly - "Front Driveshaft") ...
Hyundai Elantra AD (2016-2020) Service Manual: Brake Pedal Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Disconnect the stop lamp switch connector (A).
4.
Remove the wiring fixed clip from the brake pedal member.
5.
Remove the bra ...