Inspection |
1. |
Disconnector the negative (-) battery terminal. |
2. |
Remove the overhead console lamp.
(Refer to Body Electrical System - "Overhead Console Lamp") |
3. |
Remove the overhead console cover after loosening the screws. |
4. |
Check the continuity of between terminals. |
Hyundai Elantra AD (2016-2020) Service Manual: Rear Torsion Beam Axle Repair procedures
Removal
[Disc type]
1.
Loosen the wheel nuts slightly.
2.
Raise the vehicle, and make sure it is securely supported.
3.
Remove the rear wheel and tire (A) from front hub.
Tightening torque :
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)
•
B ...
Hyundai Elantra AD (2016-2020) Service Manual: Front Seat Shield Outer Cover Repair procedures
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
Use a plastic panel removal tool to remove int ...