Hyundai Elantra: Engine Electrical System / Smart Cruise Control System

Cruise Control Switch Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the steering wheel assembly. 3. Remove the screws from the steering back cover (A). 4. ...

General Safety Information and Caution
General Safety Information and Caution Be careful when driving the vehicle using the smart cruise control system as follows.     • The smart cruise control system may have l ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Immobilizer Control Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3. Discnnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a nut. Installation 1. Install the ...

Hyundai Elantra AD (2016-2020) Service Manual: Transaxle Control Module (TCM) Repair procedures
Inspection Transaxle Control Module(TCM) Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check point. If the problem is found, repair it. Specification: Below 1? 2. TE ...

© 2018-2026 www.helantraad.com