Hyundai Elantra: Hood / Hood Latch Release Handle Repair procedures

Hyundai Elantra AD (2016-2020) Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Repair procedures

Replacement

1.	Using a socket (B), remove the hood release handle (A).

To intall, reverse the removal procedure.

•	Make sure the hood latch cable is connected properly.

•	Make sure the hood locks / unlocks and opens / closes properly.

Hood Latch Release Handle Components and Components Location

Component Location 1. Hood latch release handle ...

Hood Latch Components and Components Location

Component Location 1. Hood latch assembly ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Rear Torsion Beam Axle Repair procedures
Removal [Disc type] 1. Loosen the wheel nuts slightly. 2. Raise the vehicle, and make sure it is securely supported. 3. Remove the rear wheel and tire (A) from front hub. Tightening torque : 107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft) • B ...

Hyundai Elantra AD (2016-2020) Service Manual: Repair procedures
Service Point Target Auto Calibration (SPTAC) This procedure provides a way to calibrate the camera by having the service technician align the car to a well lit simulated straight road target; preferably wall mounted. The LKAS camera will have a "System Out of Calibration" DTC set if not ope ...