Hyundai Elantra: Hood / Hood Latch Components and Components Location

Hyundai Elantra AD (2016-2020) Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Components and Components Location

Component Location

1. Hood latch assembly


Hood Latch Release Handle Repair procedures
Replacement 1. Using a socket (B), remove the hood release handle (A). 2. To intall, reverse the removal procedure.     • Make sure the hood latch cable is connected pr ...

Hood Latch Repair procedures
Replacement [Hood lower latch assembly] 1. Remove the front bumper. (Refer to Front Bumper - "Front Bumper Cover") 2. Loosen the mounting clips and remove the air duct (A). 3. Disconnect ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Side Airbag (SAB) Module Description and Operation
Description The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.     • Never attempt to measure th ...

Hyundai Elantra AD (2016-2020) Service Manual: Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the specification. Specification : Refer to "Specification" Removal 1. Turn the ignition switch O ...

© 2018-2025 www.helantraad.com