Hyundai Elantra: Special Driving Conditions / Driving in Flooded Areas, Highway Driving
Driving in Flooded Areas
Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake performance may be reduced.
After driving through water, dry the brakes by gently applying them several times while the vehicle is moving slowly.
Highway Driving
Tires
Adjust the tire inflation, as specified. Under-inflation may overheat or damage the tires.
Do not install worn-out or damaged tires, which may reduce traction or adversely affect vehicle handling. This could lead to sudden tire failure that may cause loss of vehicle control resulting in an accident.
Information
Never over-inflate your tires above the maximum inflation pressure, as specified on your tires.
Fuel, engine coolant and engine oil
Driving at higher speeds on the highway consumes more fuel and is less efficient than driving at a slower, more moderate speed. Maintain a moderate speed in order to conserve fuel when driving on the highway. Be sure to check both the engine coolant level and the engine oil before driving.
Drive belt
A loose or damaged drive belt may overheat the engine.
Driving in the Rain
Rain and wet roads can make driving dangerous. Here are a few things to consider
when driving in the rain or on slick pavement:
Slow down and allow extra following distance. A heavy rainfall mak ...
Winter Driving. Winter Precautions
The severe weather conditions of winter quickly wear out tires and cause other
problems. To minimize winter driving problems, you should take the following suggestions:
Snow or Icy Conditions
You ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: ETC (Electronic Throttle Control) System Troubleshooting
Fail-Safe Mode
ItemFail-SafeETC MotorThrottle valve stuck at 7°TPSTPS 1 faultReplace it with TPS 2TPS 2 faultReplace it with TPS 1TPS 1,2 faultThrottle valve stuck at 7°APSAPS 1 faultReplace it with APS 2APS 2 faultReplace it with APS 1APS 1,2 faultEngine idle state
...
Hyundai Elantra AD (2016-2020) Owners Manual: Smart Cruise Control System
1. Cruise indicator
2. Set speed
3. Vehicle-to-vehicle distance
To see the SCC screen on the LCD display in the cluster, select Assist mode ().
For more details, refer to "LCD Display Modes" in chapter 3.
The Smart Cruise Control system allows you to program the vehicle to maintain ...
