Hyundai Elantra: Rear Seat / Rear Seat Folding Lever Repair procedures
| Replacement |
| 1. |
Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow.
|
| 2. |
Loosen the mounting clips and bolts, remove the rear seat folding lever (A).
|
| 3. |
To install, reverse the removal procedure. |
Rear Seat Folding Lever Components and Components Location
Components
1. Rear seat folding lever
...
Front Seat Belt
Components and Components Location
Components
1. Height adjust 2. Front seat belt pretensioner / EFD system 3. Anchor pretensioner
Front Seat Belt Pretensioner Components and Components Lo ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: BJ Boot Repair procedures
Removal
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - "Front Driveshaft")
2.
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - "TJ Joint")
3.
Remove the Dynamic damper.
(Refer to Driveshaft Assembly - "Dynamic Damper")
4.
Using a plier or flat-tip ...
Hyundai Elantra AD (2016-2020) Service Manual: Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Verify that the mode control actuator operates to the vent mod ...
