Hyundai Elantra: Body (Interior and Exterior) / Roof Trim

Cowl Cross Bar Assembly Repair procedures
Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

Components and Components Location
Components (1) [General Type] 1. Roof trim 2. Sunvisor [LH] 3. Sunvisor [RH] 4. Assist handle Components (2) [Sunroof Type] 1. Roof trim 2. Sunvisor [LH] 3. Sunviso ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Inhibitor Switch Description and Operation
Description • The inhibitor switch mounted on the upper of transaxle and connected with shifter lever. • The inhibitor switch has four points of contact and it makes the signals(S1, S2, S3, S4). • The inhibitor switch signals delivered at the TCM according to control of t ...

Hyundai Elantra AD (2016-2020) Service Manual: Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the knock sensor connector (A). 3. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold") 4. Remove the installation bolt (A), and then remove the sens ...

© 2018-2024 www.helantraad.com