Hyundai Elantra: Body Electrical System / LKAS(Lane Keeping Assist System)

Start/Stop Button Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the crash ped lower panel. (Refer to Body - "Crash Ped Lower Panel") 3. Remove the start/stop button (B) after disconnect ...

Components and Components Location
Components 1. LKAS ON/OFF Switch2. Instrument Cluster3. LKAS Unit ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Repair procedures
Inspection ABS System Bleeding This procedure should be followed to ensure adequate bleeding of air and filling of the ESC unit, brake lines and master cylinder with brake fluid. 1. Remove the reservoir cap and fill the brake reservoir with brake fluid.     • If the ...

Hyundai Elantra AD (2016-2020) Service Manual: Crash Pad Under Cover Repair procedures
Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Use a plastic panel removal tool to remove int ...

© 2018-2026 www.helantraad.com