Hyundai Elantra: Blower / Intake Actuator Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Heating, Ventilation and Air Conditioning / Blower / Intake Actuator Description and Operation

Description

The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.

Intake Actuator Components and Components Location

Components Location 1. Intake actuator ...

Intake Actuator Specifications

Specifications Door positionVoltage (V)Error detectingMax. cooling0.3 ± 0.15 Low voltage : 0.1V or lessMax. heating4.7 ± 0.15 High voltage : 4.9V or more ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Knee Airbag (KAB) Module Description and Operation
Description The Knee Airbag (KAB) is installed inside the crash pad lower panel and protects the driver in the event of a frontal crash. The SRSCM determines if and when to deploy the KAB. • Never attempt to measure the circuit resistance of the airbag module (sq ...

Hyundai Elantra AD (2016-2020) Service Manual: Parking Assist Sensor Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front / rear bumper cover. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover") 3. Disconnect the connector (B) from the parking assist sensor (A). 4. Remove the sensor (A) by pulling out ...