Hyundai Elantra: Keyless Entry And Burglar Alarm / Specifications
| Specification |
| Item | Specification |
| Power source | 3V |
| Operating temperature | -30°C ~ +75°C (-22°F ~ +167°F) |
| RF Modulation | FSK |
| LF Modulation | ASK |
| RF frequency | 433.92 MHz |
| Button number | 4 |
| Function | Door lock |
| Door unlock | |
| Tailgate unlock |
Components and Components Location
Component Location
1. Hood switch2. Burglar horn3. BCM4. Door lock / unlock buzzer5. Front door switch6. Rear door switch
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the ECTS connector.
3.
Remove the ECTS.
4.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 1 and 3.
5.
Check that the resistance is within the specification.
...
Hyundai Elantra AD (2016-2020) Service Manual: Engine Control Module (ECM) Repair procedures
Removal
•
When replacing the ECM, the vehicle equipped withthe immobilizer must be performed procedure asbelow.
[In the case of installing used ECM]
1) Perform "ECM Neutral mode" procedure with GDS.
(Refer to Body Electrical System - "Immobilizer System")
2) After ...
