Hyundai Elantra: Front Seat / Front Seat Frame Assembly Components and Components Location

Hyundai Elantra AD (2016-2020) Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Frame Assembly Components and Components Location

Component Location

1. Front seat back frame assembly
2. Front seat cushion frame assembly

Front Seat Cushion Cover Repair procedures
Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

Front Seat Frame Assembly Repair procedures
Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Cylinder Head Repair procedures
Removal Engine removal is not required for this procedure.     • Use fender covers to avoid damaging painted surfaces. • To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal temperature (20°C [68°F]) before removin ...

Hyundai Elantra AD (2016-2020) Service Manual: Rear Seat Belt Buckle Repair procedures
Replacement 1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Cushion Assembly") 2. Loosen the mounting bolt, remove the rear seat belt buckle (A). [LH] Tightening torque : 39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft) [RH] Tightening torque : 39. ...

© 2018-2025 www.helantraad.com