Hyundai Elantra: Charging System / Battery Specifications

Specifications
?AGM60L-DIN
Item
Specification
Model type
AGM60L-DIN
Capacity [20HR/5HR] (AH)
60/48
Cold Cranking Amperage (A)
640 (SAE) 512 (EN)
Reserve Capacity (Min)
100

Battery Description and Operation
Description [AGM Battery] AGM battery is used for especially heavy load on the vehicle network depending on equipment and requirements. AGM stands for Absorbent Glass Material Battery; that is ...

Battery Components and Components Location
Components 1. Battery insulation pad2. AMG Battery3. Battery tray4. Battery mounting bracket5. Battery sensor ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Intake Manifold Repair procedures
Removal and Installation 1. Remove the engine cover. (Refer to Engine And Transaxle Assembly - “Engine Cover”) 2. Disconnect the battery negative terminal. 3. Remove the air duct and air cleaner assembly. (Refer to Intake And Exhasut System - "Air Cleaner") 4. Remove the engi ...

Hyundai Elantra AD (2016-2020) Service Manual: Power Mosfet Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until high speed. Specification Fan Speed (Manual)Motor Voltage (V)13.4 ± 0.5 (A/C OFF)3.8 ± 0.5 (A/C ON)25 ...

© 2018-2026 www.helantraad.com