WARNING
Windshield heating
Do not use the
or
position
during cooling operation in extremely humid weather. The difference between the
temperature of the outside air and that of the windshield could cause the outer
surface of the windshield to fog up, causing loss of visibility could cause an accident
resulting in serious injury or death. In this case, set the mode selection knob
or button to the
position and fan speed control knob or button to a lower speed.
NOTICE
If the engine temperature is still cold after starting, then a brief engine warm up period may be required for the vented air flow to become warm or hot.
System Maintenance
Manual Climate Control SystemHyundai Elantra AD (2016-2020) Service Manual: Heater & A/C Control Unit (Manual) Components and Components Location
Components
ConnectorPin NOFunctionConnectorPin NOFunctionA1LowB18ILL- (RHEO)2Common19Sensor ground3Ground20Ground4Middle Low21Battery (+)5Middle High22ISG DC6High23ISG B+B1IGN224ILL+ (TAIL)2PAB IGN125Sensor REF (+5V)3HTD (Rear defog indicator)26EVAP sensor (+)4Detent Out (-)27AMB sensor (+)5PTC ...
Hyundai Elantra AD (2016-2020) Service Manual: Hood Weatherstrip Repair procedures
Replacement
1.
Remove the hood weatherstrip (A).
•
Be careful not to scratch the hood weatherstrip.
2.
To intall, reverse the removal procedure. ...