Hyundai Elantra: Starting System / Starter Specifications
| Specification |
| Item | Specification | |
| Rated voltage | 12 V, 1.2 kW | |
| The number of pinion teeth | 13 | |
| Performance [No-load, 11.5 V] | Ampere | Max. 105 A |
| Speed | Min. 2,950 rpm | |
Starter Description and Operation
Description
The starting system includes the battery, starter, solenoid
switch, ignition switch, inhibitor switch (A/T), clutch pedal switch
(M/T), ignition lock switch, connection wires and th ...
Starter Components and Components Location
Components
1. Front bracket assembly2. Magnet switch assembly3. Lever4. Reducer assembly5. Lever stop6. Gasket sheet7. Yoke assembly8. Armature assembly9. Brush holder assembly
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Brake Pedal Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Disconnect the stop lamp switch connector (A).
4.
Remove the wiring fixed clip from the brake pedal member.
5.
Remove the bra ...
Hyundai Elantra AD (2016-2020) Service Manual: Accelerator Position Sensor (APS) Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the
accelerator pedal module and detects the rotation angle of the
accelerator pedal. The APS is one of the most important sensors in
engine control system, so it consists of the two sensors which adapt
individual sensor power ...
