Hyundai Elantra: Engine Control System / Intake Air Temperature Sensor (IATS) Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Description and Operation

Description

Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature.

To calculate precise air quantity, correction of the air temperature is needed because air density varies according to the temperature. So the ECM uses not only MAPS signal but also IATS signal. This sensor has a Negative Temperature Coefficient (NTC) Thermister and it's resistance changes in reverse proportion to the temperature.

Manifold Absolute Pressure Sensor (MAPS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. ConditionOutput Voltage (V)IG ON3.9 ~ 4.1Idle0.8 ~ 1.6 Remo ...

Intake Air Temperature Sensor (IATS) Specifications

Specification Temperature [°C(°F)]Resistance (k?)-40(-40)40.93 ~ 48.35-20(-4)13.89 ~ 16.030(32)5.38 ~ 6.0910(50)3.48 ~ 3.9020(68)2.31 ~ 2.5740(104)1.08 ~ 1.2150(122)0.76 ~ 0.8560(140)0.54 ~ 0.6 ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Description and Operation
Description EPS (Electric power steering, Column assist type) system uses an electric motor to assist the steering force and it is an engine operation independent steering system. EPS control module controls the motor operation according to information received from the each sensor and CAN ...

Hyundai Elantra AD (2016-2020) Service Manual: Timing Chain Repair procedures
Removal 1. Remove the cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover") 2. Set No.1 cylinder to TDC (Top dead center) on compression stroke. (1) Turn the crankshaft pulley and align its groove with the timing mark of the timing chain cover. (2) Check that ...